How to Make a Spore Print: Step by Step, With Clean Technique

Here is how to make a spore print: place a mature mushroom cap gills-down on clean foil or paper, cover it and leave it for 12 to 24 hours. The cap drops millions of spores, which leave a print in the shape of the gills. The result is only as clean as your technique: a print made on a kitchen counter carries mold spores and bacteria along with the mushroom spores.

What is a spore print used for?

A spore print is used to identify mushrooms, to study spores under a microscope and to store genetics. For identification, the color of the print is one of the first things a mycologist checks: Psilocybe cubensis gives a dark purple-brown to black print. For microscopy, a print is the starting point for preparing a slide. For collectors, a print is a compact way to keep genetics of a strain.

Prints are also the raw material for spore syringes and spore vials. A syringe is made by suspending spores from a print in sterile water.

What do you need?

  • a mature mushroom with an open cap;
  • aluminium foil or clean white and black paper (foil is easier to keep sterile);
  • a glass or bowl to cover the cap;
  • isopropyl alcohol (70 %) and paper towels;
  • a clean scalpel or knife;
  • clean or sterile gloves;
  • a zip bag or envelope for storage.

Products used here

How do you make a spore print step by step?

1
Choose the cap. Pick a mushroom whose veil has just torn and whose cap has opened, but before it has flattened and dropped most of its spores. A clean, undamaged cap gives the best print.
2
Clean your work area. Wipe the table, the foil, the glass and the knife with alcohol and let them dry. Close windows and turn off fans to keep the air still.
3
Cut the cap. Cut the stem as close to the cap as possible with a clean blade. Avoid touching the gills.
4
Place the cap. Lay it gills-down on the foil. For a light-spored mushroom, use dark paper; cubensis prints show well on white paper or foil.
5
Cover it. Put the glass over the cap. This keeps air currents and dust out and holds humidity, which helps the cap release spores.
6
Wait 12 to 24 hours. Do not lift the glass to check.
7
Remove the cap. Lift the glass and cap carefully. Let the print air-dry for an hour with the glass loosely over it.
8
Fold and store. Fold the foil over the print, put it in a labeled zip bag and note the strain and date.

Make two prints from one flush

Prints are not equally clean. Making two or three from different caps gives you a backup if one turns out contaminated.

Why is my spore print faint or empty?

A faint or missing print usually has one of three causes:

  • The cap was too young. If the veil had not torn, the gills had not yet started releasing spores.
  • The cap was too old. A cap that had already flattened and turned dark has already dropped most of its spores.
  • The strain produces few spores. Albino and Penis Envy type strains often give light or incomplete prints. For those strains, spore swabs or liquid cultures are the usual alternative. See our overview of albino magic mushroom strains.

How do you store a spore print?

Store a spore print dry, dark and cool. A sealed zip bag in a drawer at room temperature works for months; some collectors store prints in the fridge for longer keeping. Keep prints away from moisture, which can let contaminants grow on the paper.

A print is convenient but not sterile. For more controlled storage, spores are transferred into sterile water in a syringe or vial. Our articles on spore vials and on the differences between liquid culture vs spore syringe explain those formats.

Is a spore print the same as a clean culture?

No. A spore print always carries a small amount of whatever was in the air and on the mushroom. That is why mycologists who work from prints often germinate the spores on agar first and select clean growth from there. Our article on why magic mushrooms turn blue explains another thing you will see when handling caps: blue bruising on the cut stem, which is normal.

Check local rules

Spores, prints and the cultivation of psilocybin mushrooms are regulated differently per country. Check the law where you live before making, keeping or sharing prints.

Spore syringes and vials from Mondo

✓ Growing since 2009✓ Discreet, tracked shipping✓ Step-by-step manuals

Every Mondo product comes with a step-by-step manual on our site, and orders ship discreetly with tracking.

Shop spore syringes

Questions about spore prints

Usually 12 to 24 hours under a glass. Some caps drop enough spores in 6 to 8 hours.

Foil is easier to wipe clean with alcohol and does not absorb moisture. Paper shows the color of the print more clearly. Many collectors use foil for storage.

Dark purple-brown to almost black.

Kept dry and dark, a print usually stays viable for many months and often much longer. Moisture and heat shorten its life.

Yes, as long as the cap is mature and undamaged. Harvesting the rest of the flush on time is more important for the kit, so take one cap and harvest the others as usual.

The rating of www.mondogrowkits.com at WebwinkelKeur Reviews is 4,7/5 based on 609 reviews.